Cleaning And Maintenance Of The Machine; Usual Problem Handle - HOMCOM A90-297 Instruction Manual

CLEANING AND MAINTENANCE OF THE MACHINE

Please confirm you have cut off the power before clean. And the plug is drawn . Then ,you
can use the cloth with detergent .Last , Use dry cloth deal with these detergent
Caution
Do not use benzene, thinner and alcohol, gasoline and other corrosive and volatile clean-
ers cleaning products, otherwise maybe cause the product discoloration or internal struc-
ture corrosion, cracking,etc.
For the remote control , you only use the dry cloth clean , not the wet .
Please confirm you have cut off the power and the plug is drawn. Wipe off the dust and dirt
, please move to the place away from the heating , another also prevent the wet. if you will
not use for a long time , please use the dusty cover .
Number
1
Unable to boot
machine makes noise, like
2
"dada" or "xiuxiu"
3
Remote control not work
4
Stop use
5
Cant be operate

USUAL PROBLEM HANDLE

Problem
1.the plug dont inset well
2.the machine is not start .
3.The instantaneous electric
current too big, blown fuse
It is normal noise, just the
machine work
1.Remote control battery dead
2.The machine and remote
control distant too far
Time out
Maybe Operating frequency
Reason
1.Be sure the plug is inserted into
2.Open the red botton
3.Change the same model blown
No need do something
1.Change the battery
2.control the distant in 2.5meters
After 10mitues , operate again
OFF , then On
13
Method