Hisense CM4340DBG User Manual page 18

USE
NO froth
"Denser" froth
frothed milk
regulator
"Less dense" froth
N3
EN 18
Notes
• While making cappuccino, the flow of frothed milk or coffee can be
interrupted by pressing the 'Cappuccino deliver' touch key (12).
• If the milk in the container finishes while delivering frothed milk,
remove the container and add milk. Then re-attach it and press the
'Cappuccino deliver' touch key (12) to request cappuccino again.
• To ensure the complete cleanliness and hygiene of the milk frother,
always clean the circuits in the milk container lid after making
cappuccino. "PRESS CLEAN!" flashes on the display.
• Place a recipient under the milk spout.
• Press the CLEAN button on the lid (N3) and hold down for at
least 5 seconds to start the cleaning function. The appliance
displays the message "CLEANING" above a progressive bar. You
should not release the CLEAN button until the bar is complete
indicating that cleaning is concluded. When the CLEAN button
is released, the function stops. After cleaning, remove the milk
container and place in the refrigerator. The milk should not be left
out of the refrigerator for more than 15 minutes.
• To change the quantity of coffee or frothed milk the appliance
delivers automatically into the cup, proceed as described in the
section "Changing the quantity of coffee and milk for cappuccino".