Hisense CM4340DBG User Manual page 15

USE
3. A bar appears on the display, which can be made bigger or smaller;
this represents the cup filling quantity. A different quantity can be
selected using the scrolling touch keys (5 and 7) in 10 steps. A full
bar indicates that the maximum cup filling quantity of 220 ml is
selected.
4. Select the desired cup filling quantity and confirm it with the touch
key 'OK' (9) to program this setting. If you don't press the touch key
'OK' 9), the appliance automatically returns to the coffee mode after
120 seconds without saving.
After programming the display automatically jumps back to the
menu option for setting the filling quantity. To go back to the coffee
mode immediately, press the touch key 'MENU' (2) twice or wait
about 120 seconds until the appliance automatically returns to the
coffee mode.
Setting the grind level
If coffee is dispensed too quickly or too slowly (in drips), you can
change the grind level.
Only change the grind level during the milling process. Otherwise,
the coffee machine may be damaged.
1. Turn anti-clockwise to obtain finer ground coffee, slower delivery
and a creamier appearance.
2. Turn clockwise for coarser ground coffee and faster delivery (not a
drop at a time).
The adjustment will be evident after at least 2 cups of coffee are made.
Preparing espresso coffee using ground coffee
1. Press the 'Coffee strength' touch key (6) and select
"PRE-GROUND".
2. Extract the machine by pulling it outwards using the handles.
3. Lift the central lid, place one measure of preground coffee in the
funnel push the appliance back and proceed as described in the
section "Making coffee using coffee beans". You can make just one
coffee at a time by pressing the 'One cup deliver' touch key (10).
EN 15