Hisense CM4340DBG User Manual page 14

USE
EN 14
place and the coffee machine cannot make any coffee. To clean,
open the service door at the front by pulling the coffee spout,
remove the drip tray, empty it and clean it.
Important!
Always completely extract the drip tray, to avoid that it falls when
removing the grounds container. Empty the grounds container
and clean thoroughly, making sure all residues deposited on the
bottom are removed.
Every time you pull the drip tray out, the waste coffee container
must also be emptied, even if it is not completely full. If this
process is not carried out, the waste coffee container may overfill
when coffee is made and the machine may get blocked.
Never remove the water tank when the appliance is dispensing
coffee. Otherwise, the appliance will not be able to make the
coffee. If the appliance malfunctions, do not contact the service
centre straight away, but first look at the troubleshooting guide. If
this does not help, contact the customer service.
Changing the quantity of coffee
The appliance is factory preset to automatically deliver the following
quantities of coffee:
• ESPRESSO CUP;
• SMALL CUP;
• MEDIUM CUP;
• LARGE CUP;
• MUG.
To change these quantities, proceed as follows:
1. Press the touch key 'MENU' (2) and press the 'Scroll' touch keys
(5 and 7) until the menu option "PROGRAM COFFEE" appears.
Confirm the menu option with the touch key 'OK' (9).
2. Select the cup size you want to change with the scrolling touch keys
(5 and 7). When the desired cup size is displayed, confirm it with the
touch key 'OK' (9).