Hisense CM4340DBG User Manual page 17

USE
1
2 2
3. Press the Scroll touch keys (5 and 7) until "PROGRAM HOT
WATER" is displayed.
4. Press the touch key 'OK' (9) to confirm.
5. Select the required quantity of water by pressing scroll touch keys (5
and 7). The progress bar shows the quantity of water selected.
6. Press the touch key 'OK' (9) to confirm (or the 'Return' touch key (3)
to cancel the operation.
7. Press the 'Return' touch key (3) to exit the menu.
8. The appliance is now reprogrammed with the new settings
and is ready.
Making cappuccino
The machine is set by default to automatically delivery a standard
cappuccino.
1. Select the taste of the coffee you want to use to make the
cappuccino by pressing the 'Coffee strength' touch key (6).
2. Remove the lid of the milk container.
3. Fill the container with about 100 grams of milk for each cappuccino
to be prepared. Never exceed the MAX level (corresponding to
about 750 ml) marked on the container. You should ideally use
skimmed or semi skimmed milk at refrigerator temperature (about 5°C).
4. Make sure the intake tube is correctly inserted in the rubber washer.
Then replace the milk container lid.
5. Position the frothed milk regulator (N2) between the words
CAPPUCCINO and CAFFELATTE printed
6. The quantity of froth can be adjusted by moving the regulator
towards the word CAFFELATTE for a denser froth. Moving it
towards the word CAPPUCCINO obtains a less dense froth.
7. Remove the hot water spout and attach the milk container to the
nozzle.
8. Position the milk spout and then place a sufficiently large cup under
the coffee and milk spouts.
9. Press the 'Cappuccino deliver' touch key (12). "CAPPUCCINO" is
displayed and after a few seconds, frothed milk flows out of the milk
spout into the cup below (delivery stops automatically).
10. The appliance delivers coffee.
11. The cappuccino is now ready. Sweeten to taste and, if desired,
sprinkle the froth with a little cocoa powder.
on the milk container lid.
EN 17