Safety; Safe Operating Practices - Toro 30839 Operator's Manual

Safety

This machine meets or exceeds CEN standard EN
836:1997 (when appropriate decals applied), and
ANSI B71.4-2004 specifications in effect at the time
of production when equipped with required weight
as listed in Rear Ballast section.
Improper use or maintenance by the operator
or owner can result in injury. To reduce the
potential for injury, comply with these safety
instructions and always pay attention to the safety
alert symbol, which means Caution, Warning, or
Danger—personal safety instruction. Failure to
comply with the instruction may result in personal
injury or death.

Safe Operating Practices

The following instructions are from the CEN standard
EN 836:1997, ISO standard 5395:1990, and ANSI
B71.4-2004.
Training
• Read the Operator's Manual and other training material
carefully. Be familiar with the controls, safety signs,
and the proper use of the equipment.
• If the operator or mechanic can not read the language
of this manual, it is the owner's responsibility to
explain this material to them.
• Never allow children or people unfamiliar with these
instructions to use or service the mower. Local
regulations may restrict the age of the operator.
• Never mow while people, especially children, or pets
are nearby.
• Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
• Do not carry passengers.
• All drivers and mechanics should seek and obtain
professional and practical instruction. The owner is
responsible for training the users. Such instruction
should emphasize the following:
– The need for care and concentration when
working with ride-on machines
– Control of a ride-on machine sliding on a slope
will not be regained by the application of the
brake. The main reasons for loss of control are
as follows:
◊ Insufficient wheel grip
◊ Being driven too fast
◊ Inadequate braking
◊ The type of machine is unsuitable for the task
◊ Lack of awareness of the effect of ground
conditions, especially slopes
◊ Incorrect hitching and load distribution
Preparation
• While mowing, always wear substantial footwear,
long trousers, hard hat, safety glasses, and hearing
protection. Long hair, loose clothing, or jewelry may
get tangled in moving parts. Do not operate the
equipment when barefoot or wearing open sandals.
• Thoroughly inspect the area where the equipment
is to be used and remove all objects which may be
thrown by the machine.
• Warning—Fuel is highly flammable. Take the
following precautions:
– Store fuel in containers specifically designed for
this purpose.
– Refuel outdoors only and do not smoke while
refueling.
– Add fuel before starting the engine. Never
remove the cap of the fuel tank or add fuel while
the engine is running or when the engine is hot.
– If fuel is spilled, do not attempt to start the
engine but move the machine away from the
area of spillage and avoid creating any source of
ignition until fuel vapors have dissipated.
– Replace all fuel tank and container caps securely.
• Replace faulty silencers/mufflers.
• Before using, always visually inspect to see that the
blades, blade bolts, and cutting assembly are not
worn or damaged. Replace worn or damaged blades
and bolts in sets to preserve balance.
• On multi-bladed machines, take care as rotating one
blade can cause other blades to rotate.
• Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job. Only use accessories and
attachments approved by the manufacturer.
• Check that operator's presence controls, safety
switches and shields are attached and functioning
properly. Do not operate unless they are functioning
properly.
Operation
• Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
• Mow only in daylight or in good artificial light.
4