Datalogic Pegaso Falcon Quick Reference Manual page 14

Setting Up the Mobile Computer
3. Double tap the listing for the device you want to activate. Specify the
device as
Trusted
4. Double tap again and select
For more detailed instructions, refer to the Pegaso Windows CE PRG.
Connecting to a PC
In order for the Pegaso to communicate with a host PC, Microsoft® ActiveSync
must be installed on the computer. You can install it from the Product CD
included with your unit, or go to www.microsoft.com/downloads/ for informa-
tion. Reference the Pegaso PRG for detailed instructions.
Network Setup
1. Select
Start > Settings > Network and Dialup Connections
2. Double-tap on the item (varies based on the radio installed and the num-
ber of connections).
3. Complete the two tabs (shown in
Figure 6. Modifying Network Connection Settings.
•
IP Address
•
Name Servers
12
, and authenticate if needed.
Active
DHCP
: Select or set static IP settings.
: If using static IP, set
Pegaso™ Industrial PDA with Windows
to activate the device.
):
Figure 6
DNS WINS
and
.
servers.
®
CE