SECOLink KM25 Programming Manual page 13

Intruder alarm system
LANGUAGE
Service Mode } Set Language
Usually the keypad is supplied with only one language. Contact your local distributor for an additional language.
Set Language
1 English
UNREGISTER MODULES
Service Mode } Unregister Modules
Used to unregister system modules. The message First Start Press [ENT] will appear on keypad's LCD screen
Service Mode
when this procedure will end.
5 Unregister Modules
UNREGISTER KEYPAD (KM24G/KM25)
Service Mode } Unregister keypad
Used to unregister the keypad from the system.
Service Mode
7 Unregister keypad
Systems with KM24x, KM25 keypads
Programming manual
Page 13