Table of Contents
Advertisement
Slide the water tank in fully (as far as it will go), and press it in
3.
using the textured area at the bottom (fig. C).
The tank must be flush with the water tank recess (fig. D).
Switching on the appliance
Press the
button to switch on the appliance.
#
1.
The preferred temperature 100 °C lights up. The display
shows
Nx
and the preferred cooking time 20 min.
Press the temperature button to select a temperature (for
2.
more information about dishes and meals, see section:
Tables and tips).
Taste
Use
40 °C
e.g. for proving dough and
defrosting
60 °C
e.g. for defrosting
80 °C
e.g. for fish and sausages
90 °C
e.g. for fish, sausages and extra
soup ingredients
100 °C
e.g. vegetables, fish, meat and
side dishes, for juice extraction
and preserving
The appropriate default time appears in the display.
Turn the rotary selector to set a cooking time (max. 2 h).
3.
Press the
4.
The appliance heats up. The cooking time does not start
counting down until after the heating-up time.
Changing the temperature
You can change the temperature at any time. To do this, press
the required temperature button:
If you have selected a lower temperature, the cooking time
■
continues counting down without interruption.
If you have selected a higher temperature, the cooking time
■
does not continue counting down until after the heating-up
time.
Default cooking
time
If you press a temperature button twice, the current cooking
operation is cancelled. The default temperature of 100 °C and
30 minutes
cooking time of 20 minutes appear in the display. Press the
J
button to start.
20 minutes
Changing the cooking time
20 minutes
You can change the cooking time at any time. Turn the rotary
20 minutes
selector to set a new cooking time. After a few seconds, the
change is automatically adopted.
20 minutes
Stops (pauses) operation
Press the
may continue to run. To start, press the
If you open the appliance door during operation, this pauses
operation. To start, close the appliance door and press the
button briefly.
If you have switched on the basic setting "Continue after
closing door", restarting is not required (see section: Basic
settings).
Ending the operation
When the cooking time has finished, the operation
automatically ends and a signal sounds.
To end the current operation, press and hold the
Before you start another operation, empty the evaporator dish.
button.
J
"
button to pause operation. briefly. The cooling fan
J
button again briefly.
J
button.
"
9
Advertisement
Table of Contents
