Operation; After Using The Appliance - Siemens ErgoMixx MQ6 Series Instruction Manual

Operation

Warning!
Always observe the maximum quantities
and processing times in the table. X Fig. E
Blade: For cutting meat, hard cheese,
onions, herbs, garlic, fruit, vegetables, nuts
and almonds.
Ice crusher blade: For crushing ice cubes
(crushed ice). Optimum processing quantity:
4-6 ice cubes (max. 100 g).
Warning!
– The universal cutter must be completely
assembled before use!
– Before cutting meat, remove gristle,
bones and sinews.
– The universal cutter is not suitable for
cutting very hard items (coffee beans,
radishes, nutmeg) and frozen food
(fruit, etc.).
– Ice cubes should be processed only with
the ice crusher blade.
X Fig. B
1. Place the container on a smooth, clean
work surface and press into position.
Insert the universal blade or ice crusher
blade.
Important: The blade must be positioned
straight in the container.
2. Add food.
3. Place the gear attachment on the
container and rotate clockwise until it
clicks into position.
4. Place the base unit on the gear attach-
ment and press until it clicks into position.
5. Plug the mains plug into the mains.
6. Hold the base unit and universal cutter
firmly. Press the Turbo button Â.
The appliance remains switched on as
long as the button is pressed.
7. Release the button when the desired
consistency is reached. Wait until
the drive comes to a standstill.

After using the appliance

8. Disconnect the mains plug.
9. Hold down both release buttons and
remove the base unit.
10. Rotate the gear attachment
anticlockwise and remove.
11. Take hold of the blade by the plastic
handle and take out.
12. Empty the container.
■ Clean all parts immediately after use.
X Fig. D
Cleaning
W Risk of injury
Do not touch the blades of the universal
cutter / ice crusher with bare hands. To
clean, only grasp by the plastic and use a
brush.
Warning!
Never immerse the gear attachment in
liquids and do not clean under running
water or in the dishwasher.
■ Wipe the attachment with a damp cloth
only.
■ Clean the other accessory parts with a
detergent solution and a soft cloth or
sponge or place them in the dishwasher.
Clean the blades with a brush.
Sample recipe:
Honey cake with apples
Honey-apple mixture (CNHR24):
– 110 g forest honey (5 °C)
– 30 g apple in cubes (11 mm)
■ Put in universal cutter and mix on Turbo
speed for 2 seconds.
Honey-apple mixture
(CNHR25, CNHR26):
– 130 g forest honey (5 °C)
– 30 g apple in cubes (11 mm)
■ Put in universal cutter and mix on Turbo
speed for 2 seconds.
Universal cutter en
7