Table of Contents
Advertisement
Cleaning sponge
The enclosed cleaning sponge is very absorbent. Use the
cleaning sponge only for cleaning the cooking compartment
and for removing residual water from the evaporator dish.
Wash the cleaning sponge thoroughly before using for the first
time. You can wash the cleaning sponge in the washing
machine (hot wash).
Microfibre cloth
The honeycomb microfibre cloth is particularly suitable for
cleaning sensitive surfaces such as glass, glass ceramic,
stainless steel or aluminium (product no. 460 770, also
available from our online eShop). It removes liquid and greasy
deposits in one go.
Descaling
The appliance must be descaled at regular intervals in order for
it to continue operating correctly. The calc indicator reminds
you to do this.
You can only dispense with descaling completely if you
exclusively use softened water.
The descaling consists of:
Descale (approx. 30 minutes), then refill the water tank and
■
empty the evaporator dish
1st rinse (30 seconds) and then empty the evaporator dish
■
2nd rinse (30 seconds) and then remove the remaining water
■
All three steps must be completed in full. The appliance is
ready for operation again only after the 2nd rinse.
Descaler
Only use the liquid descaler recommended by customer
service for descaling (product no. 311 138, also available
online from the eShop). Other descalers may damage the
appliance.
Observe the cleaning agent manufacturer's instructions.
Prepare a descaling solution by mixing 300 ml water and
1.
60 ml liquid descaler.
Empty the water tank and fill with descaling solution.
2.
Carefully slide in the water tank with the descaling solution
3.
and close the appliance door.
Caution!
Risk of surface damage: If descaler comes into contact with the
front of the appliance or any other sensitive surfaces, wash it off
immediately with water.
Caution!
Damage to the appliance: If descaler is in the appliance for a
prolonged period, this may damage the water pump. Ensure
that the descaling and rinsing cycles take no longer than three
hours to complete.
Starting descaling
The cooking compartment must have cooled down completely.
Press the
button to switch on the appliance.
#
1.
Press the
˜
button.
2.
The
symbol (Fill water tank) appears. This is to remind you
¯
to fill the water tank with the descaling solution (see section:
Descaler).
Press the
J
button.
3.
14
1st rinse
An audible signal sounds after approx. 30 minutes. The
symbol (Fill water tank) and
Rinse the water tank thoroughly, fill with water until the MIN
1.
mark and reinsert.
®
The
symbol (Empty evaporator dish) appears.
Remove the descaling solution from the evaporator dish
2.
using the cleaning sponge provided.
Close the appliance door and press the
3.
The appliance starts rinsing.
2nd rinse
®
After a short time, the
min appears in the display.
Thoroughly rinse out the cleaning sponge.
1.
Remove the remaining water from the evaporator dish using
2.
the cleaning sponge.
Close the appliance door and press the
3.
The appliance starts rinsing.
Once descaling is complete,
display.
Press the
button to finish descaling and switch off the
#
4.
appliance.
Removing the remaining water
Remove the remaining water from the evaporator dish using the
cleaning sponge. Wipe out the cooking compartment using the
cleaning sponge and then dry with a soft cloth.
Cancelling descaling
Note: After cancelling the descaling, you must rinse the
appliance twice. The appliance is locked for other applications
until the second rinsing operation is complete.
Press and hold the
button to cancel the descaling process.
#
To ensure that no descaling solution remains in the appliance,
it must be rinsed twice after a cancellation.
The
¯
symbol appears.
Now proceed as described in the "1st rinse" section.
Nx
and
‚
:
‹‹
min are displayed.
button.
J
symbol appears again.
Nx ‹
button.
J
®
:
and
appear in the
‹‹
‹‹
¯
:
„‹
Advertisement
Table of Contents
