Advertisement
6 Ejector button
For removing the tools.
7 Apertures for inserting the tools
with lock
8 Slide for actuating the lock
When the slide is actuated, either the
apertures for inserting the tools (7) or
the rear aperture (11) is released (Fig.
Apertures for tools (7) are opened.
Rear aperture (11) is opened.
9 Release buttons
for removing accessories from the rear
aperture. Press both buttons
simultaneously.
10 Stand with cord store
For placing the appliance when taking
a break from work and for winding
up the power cord.
11 Rear aperture with catch
for inserting accessories, e.g. high-speed
hand blender
Tools
12 Stirrer
13 Kneading hook
ëçãÉ= ã çÇÉäë
14 High-speed hand blender
15 Blender jug with lid
16 Universal cutter
With the universal cutter use the appliance at
full power to prepare honey spread (according
to the recipe). You can find the recipe in the
instructions for use of the universal cutter.
If an accessory is not supplied as standard,
it can be ordered from customer service.
High-speed hand blender:
Plastic
Stainless steel
Universal cutter:
When using the accessories, follow
the separate operating instructions
for the accessories.
Operation
Before using the appliance for the first
time, clean base unit and tools.
Always unwind power cord completely.
,
).
order no. 657242
order no. 657258
order no. 659059
Important information
When the rear aperture is open,
the appliance can be operated in fast
and continuous operation only.
Selector switch 1–5 will not function.
Move slide for actuating the lock
in switch position 0/Off only.
Base unit with tools
An especially good result is achieved if the
tools are used for the following applications:
Stirrers for ...
... Sauces, egg whites, milk froth, cream,
mayonnaise, whipped cream and light dough,
e.g. cake mixture.
Stirrers are not suitable for processing heavy
dough.
Kneading hook for ...
... stiff mixtures such as short pastry, yeast
dough and potato dough as well as for mixing
heavy mincemeat dough, pasta or bread
dough.
The maximum processing quantity is 500 g
of flour and ingredients. Observe maximum
quantities in the recipes!
Fig.
Move slide to position
The apertures for inserting the tools
are open, the rear aperture is closed.
Insert the required tool pair into the aper-
tures and press on the tools until they
engage.
Note the shape of the plastic parts on
the tools to avoid mixing up the tools
(Fig.
–2)!
Insert the mains plug.
Place the food in a suitable receptacle.
Insert tools into the receptacle and switch
on the appliance at the required setting.
Settings 1, 2:
for working in and mixing in.
Settings 3, 4, 5:
for kneading and beating.
Pulse switch: M
for mixing or beating ingredients quickly.
,
en
.
5
Advertisement
