Operating The Appliance - Siemens MW67440GB Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Operating the appliance

W Risk of injury
– Before fitting/removing attachment, wait
until the drive has come to a standstill
and pull out the mains plug.
– Do not reach into the feed tube. Always
use the stuffer to push food down the
hole.
X Fig. F
■ Stand the mincer on a clean, level work
surface.
■ Take power cord out of the cable
storage and pull out to the required
length.
■ Put the completely assembled mincer
attachment, inclined slightly to the right,
on the drive.
■ Turn mincer attachment upwards until it
engages.
■ Tighten threaded ring on the mincer
attachment.
■ Attach filling tray.
■ Insert pusher into filling opening.
■ Place a bowl or plate under the outlet
opening.
■ Insert the mains plug.
■ Switch appliance on with the On/Off
button.
■ Place the food to be processed in the
filling tray.
■ Only use the pusher when adding more
ingredients.
Application instructions:
If the food to be chopped up jams in the
worm gear: Use reverse button to remove
the blockage.
1. Switch appliance off with the On/Off
button.
2. Wait until the drive comes to a standstill.
3. Briefly press reverse button.
4. Wait until the drive comes to a standstill.
5. Switch appliance on with the On/Off
button.
Operating the appliance
After using the appliance:
■ Switch appliance off with the On/Off
button.
■ Remove mains plug.
■ Pull out the pusher.
■ Remove filling tray.
■ Remove the mincer attachment. Holding
down the release button, turn the
attachment to the right and remove.
■ Disassemble mincer attachment.
■ Clean all parts, see "Cleaning and
servicing".
Shredding attachment
For shredding and slicing cheese, fruit,
vegetables, nuts, almonds, dried bread rolls
and pieces of bread, chocolate and other
hard foods.
W Risk of injury
– Before fitting/removing attachment, wait
until the drive has come to a standstill
and pull out the mains plug.
– Do not grip the sharp blades and edges
of the shredding and slicing inserts.
– Do not reach into the feed tube. Always
use the stuffer to push food down the
hole.
X Fig. G
■ Place required insert in the housing of
the shredding attachment. The insert is
automatically locked when the appliance
is switched on.
■ Put the shredding attachment, inclined
slightly to the right, on the drive.
■ Turn shredding attachment upwards
until it engages.
■ Place a bowl or plate under the outlet
opening.
■ Insert the mains plug.
■ Place the food to be processed in the
feed tube.
■ Insert pusher and hold in place.
Note:
Pusher can be inserted in one direction
only. Note position of the curve!
■ Switch appliance on with the On/Off
button.
■ Press food down using the pusher.
Do not exert too much pressure!
en
7

Advertisement

Table of Contents
loading

Table of Contents