6.1. If oriented correctly, the battery pack will slide all the way into the battery pack receptacle, and a faint but audible
click can be heard when the rear connectors mate.
6.2. If the battery pack does not slide smoothly back completely into the receptacle, remove it and verify the battery
pack is not upside down.
6.3. Notify the factory if the battery pack still will not fully seat in the receptacle, and a cause cannot be determined.
7. Repeat steps 3-6 for remaining battery packs.
8. Reinstall battery pack retaining plates.
9. Close the 1600XPi Battery Cabinet front door.
14
1600XPi Series Battery Cabinet Installation and Operation Manual 64024-006