Table of Contents
Advertisement
S
S
UPER
ERVER 6014L-M4 User's Manual
Speaker/Power LED/Keylock
On the JF2 header, pins 1, 3, 5 and
7 are for the speaker, pins 2, 4 and 6
are for the power LED and pins 8 and
10 are for the keylock. Pin 9 is absent
(key). See the table on the right for
speaker pin defi nitions.
Note: The speaker connector pins are
for use with an external speaker. If
you wish to use the onboard speaker,
you should close pins 5-7 with a
jumper.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a Wake-On-Ring card and
cable to use this feature.
Wake-On-LAN
The Wake-On-LAN (JWOL) header is
designated JWOR. See the table on
the right for pin defi nitions. You must
enable the LAN Wake-Up function in
the BIOS and also have a LAN card
with a Wake-on-LAN connector and
cable to use this feature.
Speaker Connection
Pin Defi nitions
1
Red Wire, Speaker Data
3
No Connection
5
Key
7
Speaker Data
PWR LED/Keylock Connec-
tion Pin Defi nitions
2
+Vcc
4
-Vcc
6
-Vcc
8
Keylock
10
Keylock
Wake-On-Ring
Pin Defi nitions
Pin#
1
2
Wake-On-LAN
Pin Defi nitions
Pin#
1
2
3
5-16
(JWOR)
Defi nition
Ground (Black)
Wake-up
(JWOL)
Defi nition
+5V Standby
Ground
Wake-up
Advertisement
Table of Contents
