Table of Contents
Advertisement
Chapter 7: BIOS
Watch Dog Timer
This setting is used to activate and de-activate the Watch Dog Timer. It must be
used in conjunction with the WD jumper (see Chapter 2 for details). The options
are Disabled and Enabled.
Event Log Confi guration
Highlight this item and press <Enter> to view the contents of the event log.
View Event Log
This feature allows the user to view all unread events.
Mark All Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear Event Log
This setting will clear all event logs when set to OK. The options are OK and
Cancel.
ECC Event Logging
This setting allows you to enable or disable the function of ECC Event logging. The
options are Enabled or Disabled.
Hub Interface Event Logging
This setting allows you to enable or disable the function of Hub Interface Event
logging. The options are Enabled or Disabled.
System Bus Event Logging
This setting allows you to enable or disable the function of System Bus Error Event
logging. The options are Enabled or Disabled.
Memory Buffer Event Logging
This setting allows you to enable or disable the function of Memory Buffer Event
logging. The options are Enabled or Disabled.
PCI/PCI Error Logging
This setting allows you to enable or disable the function of PCI Error logging. The
options are Enabled or Disabled.
PCI/PCI Express Error Logging
This setting allows you to enable or disable the function of PCI Express Error
logging. The options are Enabled or Disabled.
7-11
Advertisement
Table of Contents
