Table of Contents
Advertisement
Before You Begin
1. The console support weldment with console attached is positioned with the console face down in the parts tray
table packaging.
Item
1
2
CAUTION: Remove any protective covering / tape from the monocolumn and console support weldment
prior to attaching to base! Failure to remove the protective covering can cause improper grounding!
2. Lift the console support weldment up and out of the parts tray table.
3. Secure the console support weldment to the frame using four M8 X 20 Flange Head Cap Screws.
Description
Console Support Weldment
Parts Tray Table Packaging
Page 22 of 35
Qty.
1
1
Item
Description
1
Console Support
Weldment
2
M8 X 20 Flange
Head Cap Screw
27 Nm (19.91 ft.
lbs.)
Qty.
1
4
Advertisement
Table of Contents
