Table of Contents
Advertisement
Product support
Help is always at hand
Troubleshooting
1. If no electrical functions appear to work, check
the cooker isolation switch has not been turned
off also check the fuse in the switch and the
circuit breaker in you consumer unit
2. After replacing the fuse or resetting the circuit
breaker turn on individual parts of your cooker
one at a time to check function
Problem
Only parts of the cooker
work it may be that the ovens
or the grill, do not work
Nothing works (completely
dead)
The hob burners do not
operate correctly
Oven not heating up
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
38
Product support
3. DO NOT ATTEMPT TO REPAIR THIS
COOKER YOURSELF. CALL BUSH PRODUCT
SUPPORT ON 01759 487838 OR CONSULT
A GAS SAFE REGISTERED INSTALLER
Possible Cause
Links may be missing in
the rear connector box
Power is turned off at
the isolation switch or
the consumer unit
Poor electrical connection
Check if the burner parts
are correctly assembled
(especially after cleaning).
Oven temperature not set
correctly
Door is not properly
closed
Solution
Refer to the Quick Start
Guide to check the correct
placement of the links
This must be done by a
qualified competent person
Ensure isolation switch is on
Check consumer unit has not
tripped out
Have the connections
checked by a qualified
electrician
The gas supply pressure may
be too low/high.
For appliances working with
bottled LPG, the LPG cylinder
may be depleted.
Ensure that the correct
temperature has been
selected and the door is
properly closed
Advertisement
Table of Contents
