Table of Contents
Advertisement
Installing your Freestanding Cooker
Bringing it all together
Electrical connection
IMPORTANT: Electrical connections must be carried
out by a suitably qualified person and in accordance
with all relevant local building and installation
regulations.
1. See the rating label at the rear of the product for the
appliance's load rating.
2. The cooker must be connected to a dedicated
circuit suitably rated for the load of the appliance
(see rating label at rear of appliance) as shown in the
wiring diagrams below. It must be connected via a
suitably rated cable to a double pole isolator cooker
switch also suitably rated for the appliance.
3. The electrical cable should not touch the hot parts
of the appliance. .
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Installing your Freestanding Cooker
18
The electrical cable (not supplied) should not be
routed through any area that may be affected by
heat from the oven, especially the area directly
behind the oven.
Advertisement
Table of Contents
