Table of Contents
Advertisement
Using your Freestanding Cooker
Getting the most from your appliance
Controls
Digital Automatic Clock
Control knob (Cooktop Burners)
Cooking Temperature Selection Knob
Cooking Mode/Selection Knob
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Using your Freestanding Cooker
22
Instructions for use (cooktop burners)
The symbols on the control knobs mean the
following:
N
Maximum gas flow or 'high' flame and
lighting position
Minimum gas flow or 'low' flame
All operating positions must be set between the
maximum and minimum flow settings, and never
between the maximum setting and the closed
position.
Gas Burner Components
A
Burner cap
B
Burner Head
C
Burner Bowl
D
Thermocouple (where fitted)
E
Electrode
These parts can be removed for cleaning
periodically. After cleaning, they must be well
dried and correctly replaced. It is important to
check that the burner bowl and cap have been
correctly positioned. Failure to do so can cause
serious problems.
Advertisement
Table of Contents
