Bush BRCNB90DBLSS Instruction Manual page 25

Using your Freestanding Cooker
Getting the most from your appliance
Positioning the oven trays & shelves
The Baking Tray, Grill Tray or Oven Shelf can be
located in any of the five height positions in the
oven if your oven does not have Telescopic Shelf
Supports. Oven Shelves cannot be fitted to the
Telescopic Support. Only fit the Baking Tray or Grill
Tray to the Telescopic Support.
When fitting the trays or shelves, ensure they
are fitted between the two wires that are closest
together as shown below. Oven Shelves have
a stop so that they are not fully withdrawn by
accident. To fully remove the Oven Shelves, lift
the front of the shelf slightly and withdraw fully
from the oven. Note that the Grill Tray and Baking
Tray do not have a stop position and can be fully
withdrawn without interruption, so be careful not
to accidentally fully withdraw the trays.
Note: Place the Baking Tray provided on the
bottom shelf position of the oven to prevent any
spillages from dripping onto the bottom of the
oven. Never place anything (including foil and
oven trays) on the bottom of the oven when it
is in operation because this could damage the
enamel. Only place your cookware (dishes, trays,
aluminium foil, etc.) on the Oven Shelves provided
with the appliance.
If supplied, use the chrome wire handle
shown below when removing the trays from
the oven.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Using your Freestanding Cooker
24
Fit Trays and Shelves between bars as shown
below.
Above: Fitting the oven shelf to the chromed
shelf supports