Table of Contents
Advertisement
Installing your Freestanding Cooker
Bringing it all together
Gas Connection
IMPORTANT - All Gas installations must be carried
out by a suitably qualified person. For information
on choosing a gas installer contact the 'Gas Safe
Register'.
www.gassaferegister.co.uk
The appliance can be placed close to other furniture
on condition that the furniture's height does not
exceed the height of the cooker panel Make sure that
there are no combustible or flammable materials, such
as curtains, in the vicinity of the installation.
There must be at least 2cm of free space between the
back wall and the rear of the appliance to allow for
ventilation and air circulation.
Positioning
The furniture close to the cooker must be
manufactured resistant to temperatures up to 100°C.
If the kitchen furniture are higher than the hob plate
of the cooker, it must be at least 10cm away from the
cooker's side.
Surrounding furniture, cabinets and extractor fans
Min 100cm
should be positioned in accordance with the diagram
shown in figure 3. If fitted, the extractor fan must be at
least 65cm above the hob.
If no fan is fitted the minimum distance between the
hob and any cabinet or other structure must be 70cm.
Adjustment of feet
The height and level of the appliance can be adjusted
by rotating the feet located underneath the appliance
at each corner. Rotate in a clockwise direction to
decrease the height and anti clockwise to increase the
height.
Figure 3
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Installing your Freestanding Cooker
16
Advertisement
Table of Contents
