Sharp XG-E690UB Operation Manual page 22

On-Screen Display
I M A G E A D J .
B L U E S C R E E N ( O N )
R E V E R S E ( O F F )
I N P U T D I S P L A Y ( O N )
E - Z O O M / P A N ( O F F )
: S E L . : A D J . M E N U : E N D
REMAIN 5M
REMAIN 1M
I M A G E A D J .
B L U E S C R E E N ( O F F )
R E V E R S E ( O F F )
I N P U T D I S P L A Y ( O F F )
E - Z O O M / P A N ( O F F )
: S E L . : A D J . M E N U : E N D
Using the Blue Screen Function
This projector is equipped with a Blue Screen function that
will turn the screen blue when the video input terminal is
not connected to anything, or the video component is
turned off.
• Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT ƒ / ∂ buttons to select
IMAGE ADJ. Then press the MENU button to display the
IMAGE ADJ. screen as shown. Press the ADJUSTMENT
ƒ / ∂ buttons to select "BLUE SCREEN", and press the
ADJUSTMENT ß / © buttons to select ON or OFF. Press the
MENU button to return to the normal screen.
• When the Blue Screen function is on, the screen will turn
blue when no video signal is being input through the video
input terminal.
• When the Blue Screen function is on, and no video signal is
input via the input terminal for more than 15 minutes, the
power is automatically turned off.
• Five minutes and one minute before the power is turned off,
the indicators appear as shown.
Notes:
• The Blue Screen Function does not operate in RGB mode.
• When the power is turned off, the POWER indicator will light
red.
• To turn the power on again, press the POWER button to set
it to OFF, then press it again to set it to ON.
Using the On-Screen Display Override
Function
The On-Screen Displays ("VIDEO", etc.) that appear during
input select can be turned off.
• Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT ƒ / ∂ buttons to select
IMAGE ADJ. Then press the MENU button to display the
IMAGE ADJ. screen as shown. Press the ADJUSTMENT
ƒ / ∂ buttons to select "INPUT DISPLAY", and press the
ADJUSTMENT ß / © buttons to select ON or OFF, then
press the MENU button.
• When OFF is selected, the On-Screen Display ("VIDEO",
etc.) will not be displayed during input select.
E-22