Computer Mode Memory Adjustments - Sharp XG-E690UB Operation Manual

1 When RGB is selected.
R G B A D J .
R G B A D J .
R G B I N P U T A D J .
A U D I O A D J .
I M A G E A D J .
L A N G U A G E
: S E L . M E N U : N E X T
2
M E M O R Y N o 1 U S E
S E L .
: S E L .
M E M O R Y N o
C L O C K
P H A S E
H - P O S
V - P O S
R E S E T
: S E L .
E-17
R G B A D J . -
P I C T U R E
B R I G H T
R E D
B L U E
R E S E T
M E M O R Y S E L E C T ( O N )
: S E L . : A D J . M E N U : N E X T
.
E N D A D J .
: A D J . M E N U : N E X T
.1
0
: A D J . M E N U : E N D

Computer Mode Memory Adjustments

• The projector has been preset with different modes for use
with VGA and other compatible computers. However, 2
memory positions are provided to store mode adjustments.
• Each memory position can be used to store mode
adjustments to match the computer.
1. Press the MENU button to select the
Memory Adjustment mode.
• Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT ƒ / ∂ buttons to select
0 +
"RGB ADJ.
mode changes as shown.
• While the RGB adjustment menu is displayed, press the
ADJUSTMENT ƒ / ∂ buttons to select "MEMORY SELECT",
then press the ADJUSTMENT ß / © buttons to select ON,
and press the MENU button to change the image.
2. Press the ADJUSTMENT ß ß / © © buttons.
• There are 2 memory positions. Press the ADJUSTMENT
ß / © buttons to select the number of the memory you want
to adjust. Press the © button to select a higher number,
and the ß button to select a lower number. If that memory
position has not been set, "NON" will be displayed. If it has
been set, "USE" will be displayed.
MEMORY No. 0 cannot be set. It contains the fixed factory
preset settings.
• To make or change a setting, press the ADJUSTMENT
ƒ / ∂ buttons to move the cursor to "SEL." and press the
ADJUSTMENT ß / © buttons to choose "ADJ." (If you do
not want to adjust any settings, select "END".) The item
selected will be highlighted in purple. Then press the
MENU button to go to the next screen.
• Select the item you want to adjust by pressing the
ADJUSTMENT ƒ / ∂ buttons, then use the ADJUSTMENT
ß / © buttons to make the adjustments. When adjustments
are completed, press the MENU button. The display
disappears and the adjustments are stored in memory as a
user mode. See page 13 for details on the adjustment
items.
• When selecting RESET, ON will be displayed.
Automatic display mode priority
• To prioritize the computer memory modes, the order begins
with the present mode and proceeds through the remaining
modes in sequence.
For example, if set to Memory No. 2, the projector
automatically proceeds through the following order to find
the memory mode that matches the computer: Memory No.
2 Memory No. 0 (factory preset mode)
3. Press the MENU button anytime to exit
RGB ADJ.
". Press the MENU button. The MENU
Memory No. 1.