Table of Contents
Advertisement
Basic Operation of the Projector
2
POWER
OFF
ON
3
Projector
ON/OFF
When the power is on, the LAMP
POWER
REPLACEMENT indicator flashes to
show the operating condition of the
lamp.
LAMP
Green:
Flashing green: Warming up
TEMP.
Red:
4
E-ZOOM (ON)
On-Screen Display
L A N G U A G E
E N G L I S H
D E U T S C H
E S P A Ñ O L
N E D E R L A N D S
: S E L .
2
MAIN POWER
button
1
AC cord
When the MAIN
POWER is ON, the
LAMP
POWER indicator
lights red.
TEMP.
Remote control
ON/OFF
Lamp is ready
Change bulb
E-ZOOM (OFF)
S V E N S K A
I T A L I A N O
F R A N Ç A I S
日 本 語
M E N U : E N D
1. Connecting the AC cord
Connect the supplied AC cord to the socket.
2. Turn ON the MAIN POWER.
Press the MAIN POWER button on the rear of the projector.
The POWER indicator lights red and the projector enters
STANDBY mode.
3. Turn ON the POWER.
Press the POWER button on the projector or the remote
control.
• When the power is turned off by pressing the POWER (ON/OFF)
button, the POWER indicator will not turn off until the fan has
stopped running.
• See page 24, "Lamp/Maintenance Indicators", for details.
Notes:
• When the POWER indicator is not lit, the remote control cannot be
used to operate the projector.
• If the power is turned on immediately after it has been turned off, it
may take a short while before the lamp turns on. (During this
period the LAMP REPLACEMENT indicator flashes.)
• After the projector is unpacked and turned on for the first time, a
slight odor may be emitted from the exhaust fan. This odor will
disappear with use.
4. E-ZOOM/PANNING Function
This projector has an E-ZOOM mode which enlarges the
display when inputting an image of less than 800 x 600 dot in
resolution. The E-ZOOM/PANNING button can be used to
operate E-ZOOM and PANNING functions.
See page 19 "E-ZOOM/PANNING Function" for details.
Notes:
• E-ZOOM and PANNING functions do not operate with monochrome
images or in SVGA (800 x 600 dot), PAL or SECAM INPUT mode.
• The picture size differs in RGB, NTSC, PAL and SECAM INPUT
modes.
5. ON-SCREEN DISPLAY in 8 languages
The on-screen display is set to English at the factory. The
language for the unit's ON-SCREEN DISPLAY can be set to
English, German, Spanish, Dutch, Swedish, Italian, French or
Japanese.
• Setting the ON-SCREEN DISPLAY
language
1) Press the MENU button. The menu will appear on the screen.
2) Press the ADJUSTMENT ƒ / ∂ buttons until the © mark is set
to "LANGUAGE".
Press the MENU button to display the language menu.
3) Press the ADJUSTMENT ƒ / ∂ buttons until the © mark
matches the language desired, and then press the MENU
button to set the language. The ON-SCREEN DISPLAY is now
programmed to display in the language chosen.
E-14
Advertisement
Table of Contents
