A Look At The Plc Adapter - Sharp HN-VA100U Operation Manual

A Look at the PLC Adapter

A Look at the PLC Adapter
Front
SET button
1
This button is used to register the adapter on the network. (The SET
button is also used to cancel the network registration of the
adapter.)
POWER indicator
2
This lights green when the power is on (see page 16).
PLC indicator
3
This lights steadily when communication is possible, and blinks
when communication is taking place (see page 16).
Power cord
4
Plug this into an electrical outlet to connect the adapter to the
network.
6
1
2 3
4