Attaching The Hand Strap; Using The Soft Case - Sharp Internet ViewCam VN-EZ1U Operation Manual

Preparations

Attaching the Hand Strap

1
Hold the end of the strap and thread it through the
Hand strap loop on the grip.
2
Let the other end through as shown below (1) and
tie it up (2).
1
21

Using the Soft Case

1
After attaching the hand strap
(see the left column), make
sure the lens section is set to
PLAY position (see page 29).
Then put the Digital Recorder
in the soft case with the
monitor screen facing down.
2
Close the cover and seal the
Velcro
Note:
• Let your belt through the loop of the soft case and you can
carry the Digital Recorder on your waist.
2
® closures.