Sharp Internet ViewCam VN-EZ1U Operation Manual page 28

9
Press ' or " to select "30" (minutes).
10
Press the MENU button twice to turn off the menu.
The data and time indicators appear and then the
built-in clock begins to work.
Movie Recording mode
FINE LAP ‰:‰‰:‰‰
REM ‰:‰1:15
OCT.27.2‰‰‰
1‰:3‰ AM
Date and time indicators
OCT.27.2‰‰‰ OCT.27.2‰‰‰
1‰:3‰ AM 1‰:3‰ AM
Still Image Recording mode
FINE REM 17
OCT.27.2‰‰‰
1‰:3‰ AM
Notes:
• If you press the MENU button by mistake before finishing the
setting, the time then displayed on the LCD monitor is set as
the current time. In this case, proceed to step 4.
• The batteries power the built-in clock. In case of no power
source, the Digital Recorder backs up the clock for 30
minutes. Replace batteries or change the power source
meanwhile.
• Note that if power source is interrupted for more than 30
minutes, the date and time setting may be automatically
canceled. In this case, you should set them again.
Preparations
20