Using The Bm-41 With The Wp-41 Wall Plate; Using Thread Adapters - EM Acoustics EMS-41 Product User Manual

5.4 – Using the BM-41 with the WP-41 wall plate
The WP-41 is intended to work in conjunction with the BM-41 ball-joint adapter to provide
a discreet means of attaching EMS-41 loudspeakers to a wall or ceiling.
Always ensure that a secondary safety is used when suspending any loudspeaker.
5.5 – Using thread adapters
Various thread adapters are available to convert the M8 thread on an EMS-41 to a 3/8"
UNC thread to fit standard microphone stands. The threaded point has a depth of 15mm,
and is a standard M8 thread.
Once the WP-41 is secured to the wall or
ceiling, then the BM-41 can be screwed
on to the protruding M10 stud.
Once locked tight, pan and tilt on the
EMS-41 can be set by adjusting the BM-
41.
Page 14 of 25
EMS-41 User Manual
v1 November 2019