Yamaha XMAX 300 Owner's Manual page 34

Instrument and control functions
The tripmeter display is equipped with
the following:
 odometer
 tripmeter
 time tripmeter
 fuel reserve tripmeter
 oil change tripmeter
 V-belt replacement tripmeter
Push the "TRIP" switch to change the
display between the odometer "Odo",
5
tripmeter "Trip", time tripmeter "Trip
Time", oil change tripmeter "Oil Trip",
and V-belt replacement tripmeter "V-
Belt Trip" in the following order:
Odo → Trip → Trip Time → Oil Trip →
V-Belt Trip → Odo
TIP
When approximately 2.4 L (0.63 US
gal, 0.53 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter will start flashing. The display
will automatically change to the fuel re-
serve tripmeter "F Trip" and start
counting the distance traveled from
that point.
Odometer "Odo" and
"Trip"
The odometer shows the total distance
traveled by the vehicle.
The tripmeter shows the distance trav-
eled since it was last reset.
To reset the tripmeter, select it by
pushing the "TRIP" switch, and then
push the "TRIP" switch for three sec-
onds.
TIP
 The odometer will lock at 999999.
 The tripmeter will reset and con-
tinue counting after 9999.9 is
reached.
Time tripmeter "Time"
1. Time tripmeter
5-5
tripmeter The time tripmeter displays the time
that has elapsed while the main switch
was in the "ON" position since it was
last reset.
The maximum time that can be shown
is 99:59.
TIP
To reset the time tripmeter, select it by
pushing the "TRIP" switch, and then
push the "TRIP" switch for three sec-
onds.
Fuel reserve tripmeter "F Trip"
1. Fuel reserve tripmeter
When approximately 2.4 L (0.63 US
1
gal, 0.53 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter will start flashing. The display
1