Table of Contents
Advertisement
6.3 Read ID media format
6.3.1 EM Marin ID media format
The EM Marin ID media format can be changed into selected 24, 32 or 40 bits length of ID
code. The default length is 40 bits. This setting is only changed when unifying of the ID
media codes length is required – in combined systems with WIEGAND output readers with
a fixed WIEGAND data format IDs (more information in
guide available at http://www.techfass.cz/files/m_aps_400_network_reader_en.pdf).
6.4 Wiegand interface configuration
6.4.1 Standard operating mode
This is the module default operating mode. The Wiegand interface is used for controlling
the WIO 22 module in this configuration. When the reader module operates in the standard
operating mode, the I/O Port (tab. 6) is used as an input for monitoring an external device
tamper status.
6.4.2 Wiegand output
The module can be configured into a standard reader with a
or 44 bits format for
previous setting first (see chapter 6.3.1), after that they are sent in the output format.
ID media technology
EM Marin
Two long beeps and the red LED lit feature powering up the module. The green LED blink
indicates an ID reading.
EM Marin
technology ID media. Read IDs are formatted with the
Available configuration of the WIEGAND output format
26bit, 32bit, 42bit, 44bit
Table 13: ID media format in WIEGAND operating mode
Page 11
APS 400 Network Reader
WIEGAND output
user's
in 26, 32, 42
Advertisement
Table of Contents
