2 Product Description
1)
The
NREM 76
400 identification system. Up to 64 reader modules NREM 76 can be connected to a single
MCA 168 controller.
The reader modules are available in various modifications differing in the way of usage.
2.1 NREM 76 module
Reader module for general use designed for applications with
remote antenna module, see Pic.1.
The module can be installed wherever using a standard module is
inappropriate for mechanical or security reasons. Reading range is
dependent on the type of the antenna module and its frequency
tune-up; this is why it is not recommended to adjust the cable
supplied with the original antenna module.
2.2 NREM 76E module
Complete reader module designed for installation into round
installation boxes with inner diameter 68 mm. All-purpose
conception of the module's board enables installation in the most of
electrical devices' cover designs in blocks of flats and therefore
adjust the appearance of the reader modules to the appearance of
other devices designed by an architect (Pic.2).
2.3 NREM 76.BTW and NREM 76.BTW module
Applied reader module in an installation
box KU68 with a cover panel in Bticino
Light design in white (NREM 76.BTW,
Pic. 3a) or silver (NREM 76.BTS, Pic.3b)
color.
1)
Commercial designation of available versions is described in table 1.
reader modules are designed for connection to the
Pic. 3 a: NREM 76.BTW
Page 3
APS BUS
of the APS
Pic. 1: NREM 76 without cover
Pic. 2: NREM 76E+KU68 box
Pic. 3 b: NREM 76.BTS