Protect Setting Screen - Mitsubishi M800S Series Connection And Set Up Manual

Hide thumbs Also See for M800S Series:

Table of Contents

M800S/M80/E80 Series Connection and Setup Manual

35 Appx.2: Protection Setting

Operating the maintenance screen reduces a phenomenon in which defective workpieces run out due to an operation

mistake, by implementing a restriction with seven operation levels. The operation level varies depending on the MTB

specifications. Refer to the instruction manual issued by the MTB for details.

35.1 Protect Setting Screen

Display items

Current opn. level

Passwords at operation

levels 4 to 6

Protection level of each

Changes the present authenticated password to the non-authenticated state and switches the operation level to 0 to

3. Which of the operation level between 0 and 3 being switched is followed by the PLC signal of the protection level.

Changes the operation levels.

Changes the password of the operation levels 4 to 6.

Changes the protection level of each data item.

Saves the protection level setting of each data item.

IB-1501269-J

Displays the current operation level.

Displays the passwords at operation levels 4 to 6 with "****".

Displays the protection level of each data item.

The data set below the current operation level can be changed as needed.

Changing the protection level displays the message "Pro lev change" at the upper right.

Change: Specify the protection level to change data (including a case to input a file).

Output: Specify the protection level to output a file.

M80 series E80 series M80w series