Table of Contents
Advertisement
M800S/M80/E80 Series Connection and Setup Manual
31 Device Open Parameter Screen
Menu for inputting the data type
Menu
Input "BYTE" to the data type.
BYTE
When the display format is BIT format, it will be changed to the desimal format with sign.
Input "WORD" to the data type.
WORD
When the display format is BIT format, it will be changed to the desimal format with sign.
Input "DWORD" to the data type.
DWORD
When the display format is BIT format, it will be changed to the desimal format with sign.
Input "WORD(BIT)" to the data type.
WORD
Display format will be changed to the BIT format.
(BIT)
Line
Copy the data of a line where a cursor is placed.
copy
Writes the contents of the data copied (one line) into the line where the cursor is placed.
If the data of the line is changed after the [Line copy] is pressed, the data before change will be written when
Line
paste
pasting it.
Once the line is copied, it can be pasted many times until new area is copied.
Clears all allocation of the parameter in the device open parameter screen.
All
(Note) Data of the group detail will not be cleared.
clear
When parameter No. is set and press [INPUT] key, the group will be displayed with the parameter No. set is
Group
a top of the group.
search
A cursor moves to the line of the target group.
The group detail screen corresponding to the group where a cursor is placed will be displayed.
Group
When the group where a cursor is placed is not set, it will be invalid.
details
IB-1501269-J
Details
550
Advertisement
Table of Contents
