Sony Trimaster BVM-L231 Operation Manual page 64

Menu
Other Monitor
Monitor ID
Memory Stick
P&P Setting
Side by Side
Line Display
Line Color
Line Bright
Wipe
Line Display
Line Color
Line Bright
Position
Butterfly
Line Display
Line Color
Line Bright
Position
Blending
Blending Ratio
Pixel Zoom Setting
Line Color
64
Display Function Menu
Function and operation ([
Copies data from another monitor.
Enter the ID number of the source monitor.
When the NETWORK switch is set to PEER TO PEER, this is not selectable.
When the ID number is entered, you can select from Marker1, Marker2, Marker3, Marker4
or Marker5.
Copies data in the "Memory Stick".
When the item is selected, the file names in the source "Memory Stick" are displayed.
When the file is selected, you can select from Marker1, Marker2, Marker3, Marker4 or
Marker5.
Sets the multi display setting.
Sets the side by side display.
Sets display mode of the boundary line.
[Off]: Not displayed.
On: Always displayed.
Sets the boundary line color of two pictures.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan), Magenta (magenta) or Black (black).
Sets the luminance of the boundary line.
You can select from [90IRE] (bright) or 40IRE (dark).
Sets the wipe display.
Sets display mode of the boundary line.
[Auto]: Appears when the position of the boundary line is set and disappears after a
while.
On: Always displayed.
Off: Not displayed.
Sets the boundary line color.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan) or Magenta (magenta) or Black (black).
Sets the luminance of the boundary line.
You can select from [90IRE] (bright) or 40IRE (dark).
Sets the position of the boundary line.
Set to –100 (leftward) to +100 (rightward). [000]
Sets the butterfly display.
Sets display mode of the boundary line.
Off: Not displayed.
[On]: Always displayed.
Sets the boundary line color.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan) or Magenta (magenta) or Black (black).
Sets the luminance of the boundary line.
You can select from [90IRE] (bright) or 40IRE (dark).
Sets the position of the boundary line.
Set to –100 to +100. [000]
Sets the blending display.
Sets the blending ratio when two images are mixed.
Set to 000 (Signal A disappears.) to 100% (Signal B disappears). [050]
Sets the pixel zoom.
Sets the boundary line color.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan) or Magenta (magenta) or Black (black).
]: factory setting)