Sony Trimaster BVM-L231 Operation Manual page 48

Menu
Probe
Contrast Hold
Copy From
Preset Value
Other Monitor
Monitor ID
48
Adjustment Menu
Function and operation ([
Selects the probe to be used for automatic adjustment of the color temperature.
[CA-210]: Select when Konica Minolta CA-210 is used.
PM 5639/06: Select when DK-Technologies PM 5639/06 is used.
Eye-One Pro: Select when X-Rite Eye-One Pro is used.
The cable to connect the probe and the monitor is required.
About the color temperature after automatic adjustment
The values of x and y displayed by the probe may be different from those set in Target Color
Temp because the x and y values of the probe is calibrated by the monitor.
Note
An external PC with USB connector and software for adjusting the color temperature are
required to use the Eye-One Pro. Before adjusting the color temperature automatically, start
the software for adjusting the color temperature.
For the software for adjusting the color temperature, please contact your Sony representative.
For more information about the cable specification required and about the connection, see
"Connection Cable Specifications for Color Temperature Probes" on page 135.
Sets whether or not to reset the contrast setting after the color temperature is adjusted
automatically.
Off: The contrast is set to the value depending on the luminance set in Target
Luminance.
[On]: The contrast is set to the value before the automatic adjustment.
Copies the other color temperature.
Copies other data in this monitor.
Except for the XYZ format signal
When the item is selected, you can select from D93, D65, D61, D56, D-Cine, User1, User2,
User3, User4 or User5.
D93: Copies the color temperature of D93.
D65: Copies the color temperature of D65.
D61: Copies the color temperature of D61.
D56: Copies the color temperature of D56.
D-Cine: Copies the color temperature of D-Cine.
User1 to 5: Copies the color temperature of User1 to 5.
When D93, D65, D61, D56 or D-Cine data is changed, they are displayed as D93*, D65*,
D61*, D56* or D-Cine*.
For the XYZ format signal
When the item is selected, you can select from D-Cine XYZ, User XYZ1, User XYZ2, User
XYZ3, User XYZ4 or User XYZ5.
D-Cine XYZ: Copies the color temperature of D-Cine XYZ.
User XYZ1 to 5: Copies the color temperature of User XYZ1 to 5.
When D-Cine XYZ data is changed, it is displayed as D-Cine XYZ*.
Copies data from another monitor.
Enter the ID number of the source monitor.
When the NETWORK switch is set to PEER TO PEER, this is not selectable.
Except for the XYZ format signal
When the ID number is entered, you can select from D93, D65, D61, D56, D-Cine, User1,
User2, User3, User4 or User5.
D93: Copies the color temperature of D93.
D65: Copies the color temperature of D65.
D61: Copies the color temperature of D61.
D56: Copies the color temperature of D56.
D-Cine: Copies the color temperature of D-Cine.
User1 to 5: Copies the color temperature of User1 to 5.
When D93, D65, D61, D56 or D-Cine data is changed, they are displayed as D93*, D65*,
D61*, D56* or D-Cine*.
For the XYZ format signal
When the ID number is entered, you can select from D-Cine XYZ, User XYZ1, User XYZ2,
User XYZ3, User XYZ4 or User XYZ5.
D-Cine XYZ: Copies the color temperature of D-Cine XYZ.
User XYZ1 to 5: Copies the color temperature of User XYZ1 to 5.
When D-Cine XYZ data is changed, it is displayed as D-Cine XYZ*.
]: factory setting)