Sony Trimaster BVM-L231 Operation Manual page 70

Menu
Marker
Aspect Marker
Area Marker 1
Area Marker 2
Side by Side
Wipe
70
Display Function Menu
Function and operation ([
Sets whether or not to display all markers ([Off] or On).
Note
The marker is not displayed in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Computer
• When the HDMI computer signal is input
• When H Delay/V Delay is set to On
• When Side by Side is set to On
• When Wipe is set to On
• When Butterfly is set to On
• When Blending is set to On
• When Pixel Zoom is set to on
Sets whether or not to display the aspect marker ([Off] or On).
Note
The aspect marker is not displayed in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Computer
• When the HDMI computer signal is input
• When H Delay/V Delay is set to On
• When Side by Side is set to On
• When Wipe is set to On
• When Butterfly is set to On
• When Blending is set to On
• When Pixel Zoom is set to on
Sets whether or not to display the area marker 1 ([Off] or On).
Note
The area marker 1 is not displayed in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Computer
• When the HDMI computer signal is input
• When H Delay/V Delay is set to On
• When Side by Side is set to On
• When Wipe is set to On
• When Butterfly is set to On
• When Blending is set to On
• When Pixel Zoom is set to on
Sets whether or not to display the area marker 2 ([Off] or On).
Note
The area marker 2 is not displayed in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Computer
• When the HDMI computer signal is input
• When H Delay/V Delay is set to On
• When Side by Side is set to On
• When Wipe is set to On
• When Butterfly is set to On
• When Blending is set to On
• When Pixel Zoom is set to on
Sets whether or not to display in the side by side display ([Off] or On).
Note
The side by side display is not set in the following cases:
• When the internal signal is displayed
• When Pixel Zoom is set to on
Sets whether or not to display in the wipe display ([Off] or On).
Note
The wipe display is not set in the following cases:
• When the internal signal is displayed
• When Pixel Zoom is set to on
]: factory setting)