Energie AQUAPURA MONOBLOC 270i Technical Manual
  1. Manuals
  2. Brands
  3. Energie Manuals
  4. Water Heater
  5. AQUAPURA MONOBLOC 270i
  6. Technical manual

Energie AQUAPURA MONOBLOC 270i Technical Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TECHNICAL MANUAL
EN
AQUAPURA MONOBLOC
200i | 200ix | 270i | 270ix | 300i | 300ix
Revision 13
Version 0
Date 17/05/2022
Diretcives
2006/95/CE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AQUAPURA MONOBLOC 270i and is the answer not in the manual?

Questions and answers

Related Manuals for Energie AQUAPURA MONOBLOC 270i

Summary of Contents for Energie AQUAPURA MONOBLOC 270i

  • Page 1 TECHNICAL MANUAL AQUAPURA MONOBLOC 200i | 200ix | 270i | 270ix | 300i | 300ix Revision 13 Diretcives Version 0 2006/95/CE Date 17/05/2022...
  • Page 3 Technical Manual MONOBLOC Esteemed Client, We would like to thank you for your choice when you acquired an equipment for sanitary water heating. AQUAPURA MONOBLOC aero-thermal system will surely meet all your expectations and provide many years of comfort with maximum power saving.
  • Page 4 Technical Manual MONOBLOC Index INTRO ......................6 1.1. Symbols..........................6 1.2. Safety Information ........................ 6 1.3. Information ..........................7 SPECIFICATIONS ..................9 2.1. Components .......................... 9 2.2. Running Principle ....................... 10 2.3. Technical Data ........................11 TRANSPORT ....................12 INSTALLATION..................13 4.1.
  • Page 5 Technical Manual MONOBLOC 5.6.1. DISINFECT ......................33 5.6.2. VACATION Mode ....................33 5.7. Menu ............................. 33 5.8. Changing Mode ........................33 5.9. Number of Showers Available ..................34 5.10. Consultation of probe temperatures (S1, S2, S3) ............34 CHECKING GOOD RUNNING CONDITION ..........34 PARAMETERS DESCRIPTION ..............

  • Page 6: Safety Information

    Technical Manual MONOBLOC 1. INTRO 1.1. Symbols Every process that the supplier believes to be conducive to harmful danger and/or material damage will be signalled with a danger sign. To better characterize the danger, the symbol will be followed by one of these words: •...
  • Page 7 Technical Manual MONOBLOC 1.3. Information INFORMATION Installation The installation of the equipment must be carried out by staff with suitable training and • qualified for this purpose. The device must not be installed: • o outdoors; o in places with corrosive environment; o in places with a risk of temperatures below 5ºC;...
  • Page 8 Communicate to the customer the fact that the alteration or maintenance of the device must only be carried out by specialized and accredited personnel. Components not supplied with the equipment. We strongly recommend its installation. To request additional information, contact us via the email address energie@energie.pt or via our website www.energie.pt.

  • Page 9: Specifications

    Technical Manual MONOBLOC 2. SPECIFICATIONS 2.1. Components The AquaPura Monobloc package contains: Hot water storage tank with electric heater, in stainless steel, with or without an inner coil to • be used with a thermal solar boosting system, boiler, etc. Dimensions: 200 | 270 Ø...

  • Page 10: Running Principle

    Technical Manual MONOBLOC • A cooling system, at the top, responsible for transferring heat from ambient air to sanitary water; Air extraction duct Evaporator Compressor Expansion valve High pressure Solenoid valve switch Filter Low pressure switch Condensate drain Electrical box 2.2.

  • Page 11: Technical Data

    Technical Manual MONOBLOC 2.3. Technical Data Unit 200i 270i 300i 200ix 270ix 300ix Type of Equipment Air/Water Heat Pump for DHW DHW Capacity Empty Weight Dimensions (ø/height) 580/1695 580/1970 650/1860 580/1695 580/1970 650/1860 Storage Water Heater Material Stainless Steel Insulation High-density polyurethane 50mm ºC Max Running Temperature...
  • Page 12 Technical Manual MONOBLOC 3. TRANSPORT The equipment must be carried in an upright position. The equipment must be raised and lowered with extreme care, to avoid impact that could damage the material. Make sure the belts and/or transportation straps do not damage the material. WARNING Always use suitable means to transport the material (pallet lift, forklift, etc.) Correct transport position:...

  • Page 13: Installation

    Technical Manual MONOBLOC 4. INSTALLATION 4.1. Safety and Control Devices 4.1.1. High/Low Pressure Switch In case of running outside the range of pressures recommended and defined by the supplier, the equipment will switch off and indicate error in the electronic panel. 4.1.2.

  • Page 14: Drain Pan

    Technical Manual MONOBLOC 4.2. Drain pan The equipment should not be installed over an area where drains from the tank or its connections could cause damage in the adjacent area or on the lower floors of the structure. For the aforementioned reasons, it is recommended to place a drain pan under the equipment.
  • Page 15 Technical Manual MONOBLOC 4.4. Air Inlet/Outlet Installation As the AquaPura Monobloc absorbs heat during its operation, the air flow (inlet/out- let) is cooled down and must be directed to unheated areas or to the outside. The equipment will cool the room where it is placed and so if it is installed in heated rooms, the air flow must be directed to other rooms and/or the outside.
  • Page 16 Technical Manual MONOBLOC Max Lenght Ducts Ø160 Ø190 Rigid duct Flexible duct Considering 90º curves and louvers at the air inlet and outlet of the equipment. If ducts are used, directing the air flow to areas that do not require heating, there are some options: Using Outside Air If outside air is used, the unit may be placed either in a heated room or in an...
  • Page 17 Technical Manual MONOBLOC Using Ambient and Outside Air A branched duct can be used to inflate air into the equipment. So you can get hot air in the summer, from the outside, and hot air in the winter from an unheated room. UNHEATED AREA HEATED OR UNHEATED AREA...

  • Page 18: Hydraulic Installation

    Technical Manual MONOBLOC 4.5. Hydraulic Installation Caption 1 Shut Off Valve Drain Valve 2 Pressure Reducing Valve (3 bar / 0,3 MPa) Circulating Pump 3 Non-return Valve Thermostatic Mixing Valve 4 Safety group (7 bar / 0,7 MPa) A Cold Water Inlet 5 Drainage Siphon B Hot Water Outlet 6 Expansion Vessel...

  • Page 19: Electrical Connections

    Technical Manual MONOBLOC WARNING / DANGER The water you use may contain impurities and/or substances damaging to the system and even harmful to your health. Make sure you use water with quality fitting for home consumption. The following table indicates some parameters that, when exceeded, must be chemically treated. Hardness (ºdH) Treatment 3,0 - 20,0...

  • Page 20: Electrical Diagram

    Technical Manual MONOBLOC 4.8. Electrical Diagram CAPTION Electrical backup heater Ground ⏚ Water temperature probe High pressure switch Ambient temperature probe Low pressure switch COMP Evaporator temperature probe Compressor VENT Fan Safety thermostat TERM Solenoid valve Compressor thermal Neutral Solar thermal probe Phase...

  • Page 21: Control And Programming

    Technical Manual MONOBLOC 5. CONTROL and PROGRAMMING 5.1. Control Panel The control panel of the AquaPura Monobloc is simple and intuitive. It enables the configuration of several operating parameters according to the operating mode selected by the user. It comprises six command keys (ON / OFF / CANCEL, MENU, COMP ▲, E-HEATER ▼, DISINFECT and OK / LOCK that enable checking the running of the equipment, consult and change parameters.
  • Page 22 Technical Manual MONOBLOC 5.3. Display 5.3.1. Interface 5.3.2. Symbols Description Equipment in ECO operating mode Equipment in AUTO operating mode Equipment in BOOST operating mode Timer clock control Low Ambient Temperature protection Defrost Compressor Electrical heater Disinfect Chrono function Vacation mode Recirculation pump function Solar function °C...
  • Page 23 Technical Manual MONOBLOC 5.3.3. Symbols with Equipment Running Symbol Description Compressor ACTIVATED Compressor RUNNING Electrical heater ACTIVATED Electrical heater RUNNING Electrical heater ACTIVATED when S1 < P08 and/or P07 ˃ Temperature S3 (Auto Mode) Electrical heater ACTIVATED when compressor continuous running time exceeds T05 (Auto mode) Electrical heater ACTIVATED manually.

  • Page 24: Start-Up Of The System

    Technical Manual MONOBLOC 5.4. Start-up of the System Before starting, check whether the installation is set up according to the recommendations and that everything is in conformity, then you may plug your equipment to the power supply. After switching on your equipment by plugging it into the power supply, you should wait a few seconds until the controller begins to work.
  • Page 25 Technical Manual MONOBLOC 5.5.1. Mode In ECO operating mode, the equipment runs only as a Heat Pump to heat the water in the storage water tank. Thus, we could generate a greater efficiency, and savings for the user. Every time the user feels it necessary, may switch on the support electrical heater, using this mode, manually pressing the key (E-HEATER).
  • Page 26 Technical Manual MONOBLOC 5.5.5. Mode The TCC function provides the possibility of raising the water temperature when an alternative power source is available (solar photovoltaic, wind or other), increasing the efficiency of the heat pump and making the alternative power source profitable. To this end, it is sufficient to connect a cable from the inverter to the equipment's control board.
  • Page 27 Technical Manual MONOBLOC 5.5.6. Chrono scheduling of the heat pump The heat pump has an internal clock that allows the user to set two periods of operation for the control of the equipment. These periods can be distinctly defined as weekly (Monday to Friday) or weekend (Saturday and Sunday).
  • Page 28 Technical Manual MONOBLOC 5.5.7. Chrono scheduling of the recirculation pump The heat pump has an internal clock that allows the user to set two periods of operation for the pump of recirculation. These periods can be distinctly defined as weekly (Monday to Friday) or weekend (Saturday and Sunday).
  • Page 29 Technical Manual MONOBLOC 5.5.8. Additional functions The heat pump controller has four additional functions available. These functions allow the management/control of a solar thermal installation and pump of recirculation. To configure these functions, it is necessary to enter the installer level of access (F11), access the submenu parameters (F08) and select parameter P12.
  • Page 30 Technical Manual MONOBLOC Parameter P12 = 2: In the presence of a "SC" electronic control unit to control the solar thermal installation, it is possible to put the heat pump on standby whenever there is solar production, this is, when the solar thermal installation is producing the electronic control unit activates the auxiliary contact "CAUX"...
  • Page 31 Technical Manual MONOBLOC Parameter P12 = 3: In the presence of a "SC" electronic control unit to control the solar thermal installation, it is possible to put the heat pump on standby whenever there is solar production, this is, when the solar thermal installation is producing the electronic control unit activates the auxiliary contact "CAUX"...
  • Page 32 Technical Manual MONOBLOC Parameter P12 = 4: The heat pump controller assumes the control of a recirculation pump in parallel with the heat pump control. The pump of recirculation is driven by the hourly period set by the user and the temperature in the heat accumulator.

  • Page 33: Changing Mode

    Technical Manual MONOBLOC 5.6. Extra Modes 5.6.1. DISINFECT The Monobloc electronic control features the Disinfect function, which consists of a water heating cycle up to 65 °C, for a period of time long enough to prevent the formation of germs inside the tank. The Disinfect function can be set automatically or manually.

  • Page 34: Checking Good Running Condition

    Technical Manual MONOBLOC 5.9. Number of Showers Available The user can consult the number of showers available on the home page of the graphical interface (display) by using a volume of hot water at a temperature of 40ºC or more. On the initial page of the display, the parameter mentioned in this chapter will be displayed by resorting to the icon of a shower, with the number indicating the number of showers being positioned below.

  • Page 35: Parameters Description

    Technical Manual MONOBLOC 7. PARAMETERS DESCRIPTION Code Type Function Default Units Portuguese English Français Language English Deutsch Italiano Espanol Clock Date and Time Week Chrono Heat Weekend Chrono = OFF Pump ON/ OFF chrono Chrono Week Recirculation Weekend Chrono = OFF Pump ON/ OFF chrono Mode...
  • Page 36 Technical Manual MONOBLOC T03 (timer) – Maximum defrost cycle time T04 – Not used T05 (timer) – Maximum time hours compressor running T06 (timer) – Delay for defrost cycle T07 (timer) – Delay time to compressor starts running after LP error T08 (timer) –...
  • Page 37 Technical Manual MONOBLOC COMP - Contact N.O Compressor output RES - Contact N.O Electrical heater output VE- Contact N.O Test Outputs Fan output VS- Contact N.O Solenoid valve output AUX - Contact N.O Auxiliary contact output (recirculation pump / Solar thermal pump) Elist –...
  • Page 38 Technical Manual MONOBLOC 8. ERRORS The installation, assembly and repair of the equipment can only be carried out by qualified technicians. Symbol Description Problem / Checking Er01 – S1 Probe 1 OFF. Lack of temperature probe. Check for probe. • Er02 –...
  • Page 39 Technical Manual MONOBLOC 9. PROBE CHART The probes installed in the equipment (S1, S2, S3 e S4) are NTC 10kΩ@25ºC.

  • Page 40: Troubleshooting

    Technical Manual MONOBLOC TROUBLESHOOTING Problem Possible Causes How to Proceed Check the power supply Power supply failure Failure in electronic Check the corresponding circuit breaker board Cable damaged or Check the integrity of the electronic board’s disconnected electric circuit Low temperature Adjust the temperature of the set-point.
  • Page 41 Technical Manual MONOBLOC Problem Possible Causes How to Proceed Low hot water flow Hydraulic circuit blocked Check the condition of the hydraulic circuit rate Absence or incorrect sizing Installation and/or correct dimensioning of of expansion vessel (if leak Water discharge on the expansion vessel is not continuous) safety group...

  • Page 42: System Maintenance

    Technical Manual MONOBLOC SYSTEM MAINTENANCE Before undertaking any maintenance operation on the equipment, make sure it is not plugged to the power supply! Wait until the fan comes to a complete stop. WARNING Although the fluid in the cooling circuit is environmentally-friendly, it must not be released into the atmosphere.

  • Page 43: Safety Thermostat

    Technical Manual MONOBLOC 11.3. Filter of Reduction Valve To periodically clean the filter of the reduction valve, you should: Shut off the water supply. • Turn anti-clockwise until you remove tension from the spring • Remove the handle • Remove filter and clean •...

  • Page 45: Warranty

    NOTE: This sheet must be properly filled, signed and stamped by the installer / reseller and returned to ENERGIE EST, Lda., otherwise the warranty will not be validated. Send this installation sheet to warranty@energie.pt, writing the serial number of the equipment as subject.
  • Page 46 Technical Manual MONOBLOC NOTES:...

This manual is also suitable for:

Aquapura monobloc 200ixAquapura monobloc 200iAquapura monobloc 270ixAquapura monobloc 300iAquapura monobloc 300ix

Table of Contents