Table of Contents
Advertisement
General Information
The purpose of this manual is to assist you in safely operating and maintaining your Contour Header Wagon in a safe
manner. Read this manual carefully to obtain valuable information and instructions that will help you achieve safe and
dependable service. The illustrations and data used in this manual were current at the time of printing, but due to possible
engineering and/or production changes, this product may vary slightly in detail. Horst Welding reserves the right to update
and/or change components as necessary without notification.
Intended Use
The Horst Wagons CHCFRF series header wagon is intended for attachment and use on qualified power units for the sole
purpose of hauling harvester heads.
Parts List
The parts lists for this product can be found online. Visit
our online parts catalogue.
California Proposition 65
You may see a warning label similar to the following:
WARNING
Cancer and Reproductive Harm
www.P65 Warnings.ca.gov
This warning is required by California Proposition 65 (Prop 65), which is meant to notify California residents of exposures
to Prop 65-listed chemicals. For more information go to 'www.P65Warnings.ca.gov.'
Serial Number Location
The VIN number for your Contour Header Wagon is located on the back of the front axle at the top left side.
Please record your serial number here as a handy reference. In case of warranty issues, your dealer will ask for the VIN
to verify your warranty.
_________________________________________________________
Model Number
_________________________________________________________
Serial Number
4
horstwagons.com
and click on the PARTS tab to be directed to
MANUFACTURED BY/ FABRIQUE PAR:
1708828 ONTARIO LTD. DBA HORST WELDING
V.I.N. / N.I.V.:
GVWR/ PNBV: 6350 KG / 14000 LB
TYPE: TRA/REM
GAWR/
KG
LB
PNBE:
FR/AV: 3175 7000
RR/AR: 3175 7000
This vehicle conforms to all applicable Canadian motor
vehicle safety standards (CMVSS) in e ect on the date of
manufacture shown above
Y75
MODEL:
DATE:
RIM /
COLD INFL.PRESS./
TIRE/ PNEU
JANTE
PRESS DE GONF. A FROID
ST235/85 R16 (F)
16 x 6.00
95 PSI / LPC
655 kPa
ST235/85 R16 (F)
16 x 6.00
95 PSI / LPC
655 kPa
Ce véhicule est conforme à toutes les normes de
sécurité applicables aux véhicules automobiles du
Canada (NSVAC) en vigueur à la date de fabrication
indiquée ci-dessus
081019
Advertisement
Table of Contents
