Pad Height, Tilt & Depth Settings; Height Setting; Tilt Setting; Depth Setting - HORST WAGONS CONTOUR CHCFRF30 Operator's Manual

Pad Height, Tilt & Depth Settings
In addition to re-positioning along the rail the universal
header pad features three height settings with a forward /
back tilt and three depth settings.

Height Setting

• Remove the hitch pins and slide out the shoe heal
pins.
• Select and move the upper shoe assembly to one of
the two remaining set of holes.
• Replace the shoe heal pins and secure with the hitch
pins.

Tilt Setting

• When you have selected a height, remove the outside
hitch pin and slide out the shoe heal pin as shown.
• Pivot the upper shoe assembly so it lines up with pin
hole.
• Replace the shoe heal pin and secure with the hitch
pin.

Depth Setting

• Remove the hitch pins and slide out the shoe heal
pins as shown.
• Lift the upper shoe assembly and remove the four
carriage bolts and lock nuts,
• Remove the upper shoe mount from the assembly,
• Locate the assembly in one of the three depth location
holes on the mount.
• Replace and tighten securely the carriage bolts and
lock nuts and replace the entire assembly on the lower
shoe assembly
• Replace the shoe heal pins and secure with the hitch
pins.
WARNING
!
Operational Hazard
When making adjustments involving remov-
al of hardware, ensure when the hardware is
replaced it is securely fastened and torqued
according to the torque chart at the back of
this manual.
Back Tilt Back Tilt
Outside Shoe Outside Shoe
Heal Pin Heal Pin
Shoe Heal Pin Shoe Heal Pin
3 Height Settings
WARNING
!
Operational Hazard
Ensure locking & heal pins are secured with
hitch pins. If a hitch pin is lost or damaged,
replace only with the same style hitch pin.
Upper Shoe Mount
Hitch Pin
Shoe Heal Pin
Forward Tilt Forward Tilt
Forward Tilt Settings
Upper Shoe Assembly
3 Position Depth
Lower Shoe Assembly
19