Table of Contents
Advertisement
Service & Maintenance
Good maintenance is your responsibility. Poor
maintenance is an invitation to trouble.
To keep your CHCFRF Header wagon in good working
condition, and increase bearing life as well as maintain
ease of operation, periodic lubrication is essential. This
also helps to flush out moisture and dirt.
Maintenance Safety Checklist
9
Follow good shop practices.
9
Keep service area clean and dry.
9
Use adequate light for the job at hand.
9
Never work under equipment unless it is blocked
securely
9
Parts replacement should be performed by qualified
personnel to ensure safe and complete installation.
Wheel Bearings:
Inspect bearings monthly: check for
•
Unusual front to back movement or chatter
•
Free spinning with no grinding noise.
Replace if required, replacements and repacking should be performed by qualified personnel. For replacement parts and
repacking procedures please call your dealer or contact Horst Wagons.
Wheel bearings should cleaned, re-packed & adjusted, annually, or 1000 hours of operation, which-ever comes first. Use
a premium quality, multipurpose, extreme- pressure (EP2) calcium sulfonate or equivalent grease for the bearings (NLGI
GC-LB Certified)
•
Check the bearing seal, replace if required
•
Clean and check bearings for wear, replace if required.
•
Clean and check bearing cups, replace if required
Seal
Bearing
CAUTION
!
Operational Hazard
Personal Protection Equipment
(PPE) is required when operating
or maintaining this machine.
36
Cup
Slotted Nut
SNL00001
By following a careful service and maintenance program
for your machine, you will enjoy many years of trouble-
free operation.
Replacement of parts should be done by a qualified
personnel only. Keep a record of all maintenance, to
ensure scheduled inspections and maintenance are
performed.
9
A fire extinguisher and first aid kit should be kept
readily accessible.
9
Always use personal protection devices such as eye,
hand, foot and hearing protectors.
9
Use heavy gloves when handling heavy or sharp
components.
9
Ensure wagon is disconnected from the towing
vehicle and wheels are chocked.
Cup
Bearing
Cotter Pin
Dust Cap
Bearing
Washer
Advertisement
Table of Contents
