High Back Pad for Flex Draper Head
•
Remove the hitch pins and slide out the lower
locking (short) and locking pin (long), leave the back
extension in place.
•
Swing the two corn head plates and large pad
assembly180 degrees to the open position.
•
Switch locations of the locking pins and reassemble to
the pad as shown: locking pin-long thru the large pad.
•
Ensure the hitch pins are securely in place.
•
Release the shoe lock handle and locate base pad on
rail to desired position, lock the handle.
Low Back pad for Standard Cutting Platform
•
Remove the hitch pins and slide out the lower locking
(short) and locking pin (long), remove the back
extension.
•
Swing the two corn head plates and large pad
assembly180 degrees to the open position.
•
Place the back extension between the corn head
plates and align the top holes as shown.
•
Switch locations of the locking pins and reassemble to
the pad as shown: locking pin-long thru the large pad.
•
Ensure the hitch pins are securely in place.
•
Release the shoe lock handle and locate base pad on
rail to desired position, lock the handle.
Standard Corn Head with Low Back
•
Remove the hitch pins and slide out the lower locking
(short) and locking pin (long), remove the back
extension.
•
Swing the large pad assembly180 degrees to the
open position.
•
Place the back extension between the corn head
plates and align the top holes as shown.
•
Switch locations of the locking pins and reassemble to
the pad as shown: locking pin-long thru the large pad.
•
Ensure the hitch pins are securely in place.
•
Release the shoe lock handle and locate base pad on
rail to desired position, lock the handle.
18
Lower Locking Pin - Short
Hitch Pin
Back Extension
Lower Locking
Pin - Short
Hitch Pin
Corn Head Plates
Back Extension
Lower Locking
Pin - Short
Hitch Pin
Large Pad Assembly
Corn Head Plate
Locking Pin - Long
Large Pad Assembly
Corn Head Plate
Locking Pin - Long
Large Pad Assembly
Locking Pin - Long