Table of Contents
Advertisement
Extendable Tongue:
When extra length is required on the tongue, the 5
position pullout may be extended up to a of maximum of
91.5 cm (3.0').
• Remove the pullout stop hardware as shown in the
diagram.
• Extend the pullout to the desired length, then
replace the pullout stop hardware.
• Ensure the hardware is fastened securely.
• The retractable, auto-lock feature will work in all
extended positions.
Retractable Pullout w/ auto lock:
This feature will help eliminate the need for precise
hook-up alignment. The pull out provides some
adjustment to aid in aligning the vehicle to the ball
hitch at the point of hook up. The pullout auto-locks into
position when pulling away.
• Back the tow vehicle close to the tongue.
• Pull up on the auto-lock latch, this releases the
pullout stop and will allow the pullout to move inside
the main tongue assembly.
• Move the pullout in/out as required to align the
coupler to the tow vehicle hitch point,
• When aligned, secure the coupler with a appropriate
sized coupler lock pin,
• Pull the tow vehicle ahead slightly to activate and
engage the auto lock on the pullout.
• Stop the tow vehicle, check that the pullout lock is in
place and attach the safety chain.
22
Pullout Stop
Pullout
Unlocked
Locked
2 5/16 Coupler
Coupler Lock Pin
Ball Hitch
Auto-lock Latch
Pullout Stop
Pullout Stop
Pullout
Advertisement
Table of Contents
