Mo-vis coot Control R-net Installation Manual page 42

STEP
8
CAUTION:
if the movement of the wheelchair is symmetrical when moving the
handlebar to both sides. Check if the device returns to its default
position.
Scoot Control Installation manual
ACTION
beep.
Bring the handlebar back to
the neutral position.
If the calibration was successful, please proceed to check
RESULT
Calibration was successful
when LEDs D11-15 are all
green. Calibration data is
stored in the device.
When the LEDs are red, cali-
bration failed and no data is
stored in the device. Repeat
the entire process.
41