Mo-vis coot Control R-net Installation Manual page 19

NUMBER
9
10
A parameter is available to control 10 axes instead of 5 (see
configuration on page 25
NUMBER
1
2
...
9
10
LiNX version
You can connect an external LiNX-compatible keypad to the Scoot Control
LiNX (P015-71) to control the actuators of the power chair.
A keypress will result in sending a command to the LiNX system. This can be
configured using the LiNX access software.
18
Axis 5 moves UP
Axis 5 moves DOWN
for more information).
Alternating UP - DOWN movements of Axis 1
Alternating UP - DOWN movements of Axis 2
...
Alternating UP - DOWN movements of Axis 9
Alternating UP - DOWN movements of Axis 10
ACTION
ACTION
Scoot Control Installation manual
On-board