Calibration; Enter The On-Board Calibration Mode - Mo-vis coot Control R-net Installation Manual

Calibration

CAUTION:
service engineer should recalibrate the device in order to guarantee a
proper functioning. Otherwise, you should only recalibrate when you
experience asymmetrical movements.

Enter the on-board calibration mode

Proceed as follows:
STEP
1 Verify that the R-net or LiNX
system is switched off.
2 Verify that the throttles and
steering bar are in neutral.
3 Simultaneously press S2, S3
and S4.
4 While S2, S3 and S4 are
38
After every change or repair of the device, a qualified
ACTION BUTTONS
Scoot Control Installation manual