Mo-vis coot Control R-net Installation Manual page 29

Save/discard changes
Press S6 to save the changes. All LEDs of the battery gauge will flash green.
Turn the device off and on again.
If the device is switched off without pressing S6, the changes will not be
saved.
Parameter settings for R-net
There are 5 available parameters:
PAR.
NUMBER
1 = Right 1
throttle
2
3
2 = Left 1
throttle
2
3
28
PAR. ACTION (DEFAULT
VALUE SETTING IN BOLD)
None (no movement of
the wheelchair when
you push the throttle)
Forward
Reverse
None (no movement of
the wheelchair when
you push the throttle)
Forward
Reverse
Adjust the default
direction of the
throttle(s).
Adjust the default
direction of the
throttle(s).
Scoot Control Installation manual
DESCRIPTION