Led Status - Sony EVI-HD1 Technical Manual

Pan/Tilt Status Code List
P Q R S
- - - - - - - - 0 - - - - - - 1 A Pan movement all the way to the left
- - - - - - - - 0 - - - - - 1 - A Pan movement all the way to the right
- - - - - - - - 0 - - - - 1 - - A Tilt movement all the way up
- - - - - - - - 0 - - - 1 - - - A Tilt movement all the way down
- - - - - - - - - - 0 0 - - - - Pan movement is correct
- - - - - - - - - - 0 1 - - - - Pan position cannot be detected
- - - - - - - - - - 1 0 - - - - The Pan mechanism is abnormal
- - - - - - 0 0 0 - - - - - - - The Tilt movement is correct
- - - - - - 0 1 0 - - - - - - - The Tilt position cannot be detected
- - - - - - 1 0 0 - - - - - - - The Tilt mechanism is abnormal
- - - - 0 0 - - 0 - - - - - - - No movement instructions
- - - - 0 1 - - 0 - - - - - - - In the midst of a Pan/Tilt
- - - - 1 0 - - 0 - - - - - - - Pan/Tilt completed
- - - - 1 1 - - 0 - - - - - - - Pan/Tilt failed
- - 0 0 - - - - 0 - - - - - - - Not initialized
- - 0 1 - - - - 0 - - - - - - - Initializing
- -1 0 - - - - 0 - - - - - - - Initialization completed
- -1 1 - - - - 0 - - - - - - - Initialization failed
( - : optional)
Pan/Tilt Position (for reference)
PAN FA60 (–100 degree) to 05A0 (+100 degree)
TILT FE98 (–25 degree) to 0168 (+25 degree)

LED Status

Main power ON Power On (including initializing period)
When receiving infrared signals form Remote Commander
At position detection error
Sandby status
Power off by VISCA or the Remote Commander
Main power Off
Initialization Pan/tilt error
error Internal error(LSI, etc.)
BOTTOM switch Setting error (Example: when the SYSTEM SELECT switch
and SYSTEM is set to 7 or F.)
SELECT switch
Parameter (position)
Status
Command List
POWER (Green) STANDBY (Orange)
On Off
Blinking Off
On Blinking
Off On
Off Off
Blinking Blinking
Blinking alternately
On On
37