Table of Contents
Advertisement
Electrical Characteristics
Rated voltage/frequency
Rated current
If printing is continuously performed with a high print ratio, the overcurrent protection may be
activated and result in uneven print density or a low voltage error. Therefore, the printing length
must not exceed the following values when printing with high print ratio.
Print ratio: Number of dots being energized per one dot line / Total number of dots per one dot line
(576 dots)
Print ratio
Print example
Print length
100 to 240VAC 50/60 Hz
1.0 A
80%
58 mm {2.28"}
30 mm
100%
72 mm {2.83"}
20 mm
Appendix
67
Advertisement
Table of Contents
