Epson TM-T82 User Manual
Hide thumbs Also See for TM-T82:

Advertisement

English
User's Manual
M00071100EN
TM-T88V User's Manual 1

Advertisement

Table of Contents
loading

Summary of Contents for Epson TM-T82

  • Page 1 English User’s Manual M00071100EN TM-T88V User’s Manual 1...
  • Page 2 Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko...
  • Page 3: Important Safety Information

    If water or other liquid spills into this equipment, unplug the AC cable immediately, and then contact your dealer or a Seiko Epson service center for advice. Continued usage may lead to fire. Do not use aerosol sprayers containing flammable gas inside or around this product. Doing so may cause fire.
  • Page 4: Caution Labels

    Downloading Drivers, Utilities, and Manuals The latest versions of drivers, utilities, and manuals can be downloaded from the following URL. http://download.epson-biz.com/?service=pos 4 TM-T82 User’s Manual...
  • Page 5 58-mm width paper guide plate Control panel label for Power switch vertical installation cover Power switch User’s Manual Rubber feet for waterproof cover vertical installation (Bahasa Indonesia) Wall hanging bracket Screws for wall Roll paper hanging bracket TM-T82 User’s Manual 5...
  • Page 6: Part Names

    Note: To make the Paper LED light up when the roll paper is nearly out, enable the paper near- end sensor with the utility software for the TM-T82, and use the printer horizontally (with the paper exit on top). Feed button This button feeds paper.
  • Page 7: Connecting The Cables

    When connecting the USB cable, fix the USB cable with the hook shown in the illustration below to prevent the cable from coming off. Hook Connect the other end of the interface cable to the computer. Connect the AC cable to the AC adapter. TM-T82 User’s Manual 7...
  • Page 8: Installing The Printer Vertically

    When installing the printer vertically, be sure to attach the included control panel label for vertical installation on the roll paper cover, and attach 4 rubber feet in the rectangular indents in the printer case, as shown in the illustration below. Control panel label for vertical installation Rubber feet 8 TM-T82 User’s Manual...
  • Page 9 Attach 2 rubber feet in the rectangular indents in the printer case, and attach 2 rubber feet within the scribed line on the hanging bracket. Place the printer with the wall-hanging-bracket-side down. Rubber feet Control panel label for vertical installation 207 mm {8.15"} Wall hanging bracket TM-T82 User’s Manual 9...
  • Page 10: Hanging The Printer On A Wall

    Remove the installed 2 screws from the printer, as shown in the illustration below. Install the wall hanging bracket on the printer, and fix it using the screws removed in Step 2. Screws Wall hanging bracket 10 TM-T82 User’s Manual...
  • Page 11: Installing Roll Paper

    Align the holes in the wall hanging bracket with the screws on the wall, and hook it securely. Installing Roll Paper Follow the steps below to install the roll paper. Use the cover open lever to open the roll paper cover. Cover open lever TM-T82 User’s Manual 11...
  • Page 12 Remove the used roll paper core if any, and insert the roll paper. The correct direction of the paper is shown in the illustration below. Pull out some paper, and close the roll paper cover. When the printer power is on, the roll paper is automatically cut. 12 TM-T82 User’s Manual...
  • Page 13: Changing The Paper Width

    Once you change the paper width from 80 to 58 mm, you cannot change it back to 80 mm. When changing the paper width, be sure to make the setting for the paper width with the utility software for the TM-T82. Open the roll paper cover.
  • Page 14: Attaching Cover On Power Switch

    ❏ Printing stops if the head overheats and resumes automatically when it cools. ❏ For other cases, turn the printer off, and after 10 seconds, back on. 14 TM-T82 User’s Manual...
  • Page 15 Turn the knob until you see a triangle in the opening. This returns the cutter blade to the normal position. See the operating instructions on the back of the cutter cover. Knob Triangle Install the cutter cover. Open the roll paper cover and remove the jammed paper. TM-T82 User’s Manual 15...
  • Page 16: Cleaning The Printer Case

    Turn off the printer, open the roll paper cover, and clean the thermal elements of the thermal head with a cotton swab moistened with an alcohol solvent (ethanol or IPA). Epson recommends cleaning the thermal head periodically (generally every 3 months) to maintain receipt print quality.
  • Page 17: Specifications

    *1: The values are those when the paper width is changed to 58 mm by installing the 58-mm width paper guide plate and making the paper width setting with utility software for the TM-T82. For how to install the 58-mm width paper guide plate, see “Changing the Paper Width” on page 13.

Table of Contents